kidwellj/multi-room-hifi
1
0
Fork 0
mirror of https://github.com/kidwellj/multi-room-hifi.git synced 2025-01-09 13:22:20 +00:00
Code Issues Packages Projects Releases Wiki Activity

fixed table

Browse source
This commit is contained in:
Jeremy Kidwell 2022-08-11 21:13:43 +01:00
parent be3ddfd331
commit 2ef6f0fc51
1 changed files with 14 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

16
README.md
View file

@ -56,8 +56,18 @@ Connect the following pins between the TTGO T8 ESP32 board and your I2S DAC:
| ESP pin | PCM5102 I2S signal |
| ------------- | ------------- |
| GPIO25 | LRCK |
| GPIO25 | DATA IN (DIN) |
| GPIO26 | BCK |
| GPIO25 | LCK |
| GPIO26 | DATA IN (DIN) |
| GPIO27 | BCK |
| GND | SCK, GND |
| 5V | VIN |
![Schematic for wiring](https://github.com/schreibfaul1/ESP32-audioI2S/raw/master/additional_info/ESP32_I2S_PCM5102A_ONLY.JPG)
Next wire up your TDA8932. This is a bit simpler:
1. The power pins can go to a DC converter. I re-used one from an old laptop. Optimum is 24V at 2amp.
2. I wired input via two short wires to the PCM5102 board coming off a 3.5mm adapter
3. Then I soldered on two wires which connect to speaker terminals
Flash your ESP32 using the same process detailed above, and you're all set!